一、Introduction to China SRRC Certification
National Radio Regulatory Commission, SRRC; official website www.srrc.org. All cn radio transmitting equipment exported to China or produced in China shall be SRRC certified, indicating the model approval code of wireless transmitting equipment.
二、Is China SRRC certification mandatory?
SRRC certification is a mandatory certification for radio products in China. SRRC certification can be legally marketed in China. Therefore, if your radio products want to be legally sold in China, then SRRC certification is necessary.
三、China SRRC certified product range:
1. Mobile communication equipment of the public network (2G / 3G / 4G / 5G equipment);
2. Special communication equipment (walkie-talkie, digital cluster, RFID equipment, etc.);
3. Wireless access equipment (Wi-Fi, Bluetooth equipment, etc.);
4. Broadcasting and transmitting equipment (radio and television, etc.);
5. Radar equipment (meteorological, aviation, Marine and vehicle-icular, etc.);
6. Other equipment, etc.
四、China SRRC Certification and Test Program
1. Radio frequency range test;
2. Transmit power test;
3. Harmonic and stray emission test;
4. Receiving sensitivity test;
5. Electromagnetic compatibility test;
These are just some possible test items, and the specific test content and requirements may vary depending on the device type and purpose.
五、China SRRC Certification Notes:
1. The tested equipment model shall have test procedures, methods, standards, conditions, test connection block diagram, special test accessories and the latest test report (copy or copy is available);
2. If the transmitting port of the test equipment is a non-standard interface, the text or chart basis of the test connection cable and the cable decay value stamped with the company seal shall be provided;
3. When necessary, the applicant must send engineering and technical personnel to cooperate with the examination;
4. If the equipment submitted by the applicant fails to pass after the inspection, the second sampling or supplementary sample is allowed for re-inspection. If more than two products (including two) fail after sampling, the second sampling will not be conducted and judged as unqualified product; more than one unqualified product remains after the second inspection.
For more details, please contact us:ZL Miss Zhou:+86 13417442373
