I. the importance of Telec certification

Japan Telec certification is called Japan Radio Wave Law, also known as MIC certification, is a mandatory certification for wireless products in Japan.

TELEC certification is mainly required in export customs clearance, so the certification is highly recognized by customers, which can help products sell better and faster in the Japanese market.

Ii. Introduction to Telec Certification

The Radio Act requires type approval (technical regulatory compliance certification) of specified radio equipment, and the certification body is a registered certification body recognized by MIC in the scope of specified radio equipment.

TELEC(Telecom Engineering Center) is the main registration authority for radio equipment compliance certification in Japan.

Iii. Telec authentication type

TELEC Certification includes Test Certification and Type Certification.

Test certification is for each equipment unit verification, the certification is only valid for each verified equipment unit; Type certification refers to the validation of a batch of samples of equipment of the same design and manufacture. The certification is valid for the batch of equipment, but if the design or manufacture of the equipment changes, the equipment will need to be re-certified.

It is worth noting that the use of non-low-power wireless stations and their terminal equipment requires a license application from MIC. In addition, the conformity certification of telecommunication terminal equipment can be divided into two situations: for common telephone devices, JATE certification should be carried out according to the requirements of the telecommunications Enterprise Law; For wireless terminal equipment, in addition to JATE certification as required by the Telecommunications Enterprise Law, TELEC certification as required by the Radio Law is also required.

Iv. Telec Certification process

Cycle: Zhongle certification provides you with the fastest certification speed, the fastest 4 weeks to complete the certification.

Certification Information:

1) Instructions;

2) Block diagram;

3) Circuit schematic diagram;

4) Operation description; (That is, the description of the working principle and process of chip and crystal oscillator in the block diagram shall reflect the model and crystal oscillator information)

5) BOM; (All crystal oscillator information and chip models and all zero device position numbers should be reflected)

6) PCB Layout;

7) Bitmap; (that is, component location diagram on PCB board)

8) Label; (The size and location map on the product should be marked to reflect the size of MIC logo, MIC number and MIC logo)

9) ISO9001;

10) Antenna specification;

11) Module specification;

Note: You are advised to submit all documents in Japanese. English documents are also accepted. The test report can be in the language of the local testing facility.

Telec certification, the above 11 information preparation is the key, Zhongle certification has a special project team for your one-to-one guidance.

V. Telec certification process

For more details, please contact ZL Miss Zhou:+86 13417442373 

Please use skype to scan