Eu CE Certification

The "CE" mark is a safety certification mark that is regarded as the manufacturer's passport to open and enter the European market. CE stands for European unity. All products labeled with the "CE" mark can be sold in the EU member states, without meeting the requirements of each member state, thus realizing the free circulation of goods within the EU member States. In short, CE certification is a mandatory certification for products to enter the European market.

First, Introduction to CE Certification

CE certification is the "main requirement" at the core of the European directive, which has a specific meaning in the EC Resolution on New Methods of Technical Harmonization and Standards (85/C136/01) of 7 May 1985, which needs to be used for the purpose of formulating and implementing the directive. That is, the basic safety requirements, which are limited to products that do not endanger the safety of humans, animals and goods, are not general quality requirements. The harmonization directive specifies only the main requirements, and the general directive requirements are the tasks of the standards. If the product meets the main requirements of the relevant directive, the CE mark can be added, rather than the general quality of the relevant standards to determine whether the CE mark can be used. The exact meaning is: the CE mark is a safety conformity mark rather than a quality conformity mark. It is regarded as a passport for manufacturers to open and enter the European market. All products with the "CE" mark can be sold in each member country of the European Union without meeting the requirements of each member country, thus realizing the free circulation of goods within the EU member States.

The word CE, abbreviated from the French "Communate Europpene", means the European Community. The European Community later evolved into the European Union (EU).

Two, the significance of the CE mark

The significance of the CE mark is: The abbreviation CE is used as a symbol to indicate that the product affixed with the CE mark complies with the Essential Requirements stipulated in the relevant European directive, and is used to verify that the product has passed the corresponding conformity assessment procedures and/or the manufacturer's conformity declaration, which truly becomes the passport for the product to be allowed to enter the European Community market for sale.

The relevant directive requires that the industrial products affixed with the CE mark shall not be put on the market without the CE mark. Those products which have been affixed with the CE mark and entered the market shall be ordered to withdraw from the market if they fail to meet the safety requirements. Those who continue to violate the provisions of the CE mark in the Directive will be restricted or prohibited from entering the EU market or forced to withdraw from the market. The CE mark is not a quality mark. It is a mark indicating that the product has complied with the European safety/health/environmental protection/hygiene standards and directives. The CE mark is mandatory for all products sold in the EU.

Three, the advantages of applying for CE certification

1. Eu laws, regulations and coordination standards are not only numerous, but also very complex in content. Therefore, it is a wise decision to obtain the help of EU designated institutions, which can save time, effort and reduce risks.

2. Obtain the CE certification from the EU designated agency, which can obtain the trust of consumers and market supervision agencies to the greatest extent;

3, can effectively prevent the appearance of those irresponsible accusations;

4. In the case of litigation, the CE certification issued by the designated institution of the European Union will become the technical evidence with legal effect.

Four, CE certification to prepare data

1. Product application form

2. User manual

3. PCB routing diagram

4. Circuit schematic diagram

5. key components list (After our company makes the list requirements, your company will provide according to the list)

6. BOM form and RoHS report of parts (if any)

7. Description of working principle

8. Fixed frequency software and software debugging instructions (wireless products need to be provided, other products do not need to be provided)

Remarks:

1. Relevant documents should be in both Chinese and English.

2. In order to shorten the certification cycle, it is best to provide the information in the form of electronic documents.

Five, Product range of CE certification

1. power CE certification: communication power supply, switching power supply, charger, display power supply, LED power supply, LCD power supply, uninterruptible power supply UPS, etc.

2. lamps CE certification: pendant lamp, track lamp, courtyard lamp, hand lamp, down lamp, LED street lamp, lamp string, lamp, LED spot lamp, LED bulb lamp, grid lamp, aquarium lamp, street lamp, LED lamp, LED lamp, LED lamp, energy-saving lamp, T8 lamp, etc.

3. household appliances CE certification: fan, electric kettle, stereo, TV, mouse, vacuum cleaner, etc.

4. electronic CE certification: earplugs, routers, mobile phone batteries, laser Pointers, vibrators, etc.

5. communication products CE certification: telephone, wired telephone wireless master and secondary machine, fax machine, telephone answering machine, data machine, data interface card and other communication products.

6. wireless products CE certification: Bluetooth BT products, tablet computers, wireless keyboard, wireless mouse, wireless reader, wireless transceiver, wireless intercom, wireless microphone, remote control, wireless network devices, wireless image transmission system and other low-power wireless products;

7. CE certification for wireless communication products: 2G mobile phones, 3G mobile phones, 3.5G mobile phones, DECT mobile phones (1.8G, 1.9G frequency band), wireless intercom, etc.;

8. Mechanical CE Certification: Gasoline engine, electric welding machine, CNC drilling machine, tool grinder, lawn mower, washing equipment, bulldozer, elevator, hole punching machine, dishwasher, water treatment equipment, gasoline welding machine, printing machinery, woodworking machinery, rotary drilling rig, lawnmower, snowplow, excavator, printing press, printer, cutting machine, roller, leveling machine, cutting machine, straightener, food machinery, lawn machine, etc.

9. Medical device CE certification

For more details, please contact ZL Miss Zhou:+86 13417442373 

Please use skype to scan